Using Tv Disc & A/V; Disc - Mitsubishi Electric HD-6000 Owner's Manual

Using TV Disc & AiV Discs
TV Disc & A/V Disc Track List Screen
Figure !5
When viewing the TV Disc or an A/V Disc, press GUIDE
to display its Track List. The Channel, Station, Date,
Time, Program name and whether it has been Watched
(Y=yes, N=no) will be displayed. Tracks will be listed in
date and time order and will vary in size.
Press ADJUST • or • to navigate through the Track
List. Press INFO to see the recording's length and
the amount of memory it will use. Free disc space is
displayed in the upper right. If the broadcaster has
sent detailed information regarding the program, it will
also display when you press INFO. To play a track,
select it on the list, then press ENTER. To change
pages, press CH • or •. To delete a track, select it
on the list and press CANCEL. Press CANCEL again to
confirm.
Figure 15, Track List screen for TV Disc
2. Press ADJUST • or • to select a track. Then press
ENTER to start playing.
3. Press PAUSE to pause the playback.
4. Press REC (record) on the HD-6000 remote. The
Record To screen will display.
5. In the "Record to" section, review the destination
device (DVCR, VCR). Change if necessary.
6. Press REC a second time to initiate recording.
7. The TV Disc and destination device cannot be
viewed or used while recording. To view a different
device, press DEVICE and select.
IMPORTANT
g programs cannot be transferred from
TV Disc and the TV Disc is not intended to
as permanent storage of digital recordings.
recommends you transfer important
ital recordings to an external device such as
a D-VHS VCR. Recordings stored on TV Disc
are lost and cannot be recovered if the TV Disc
requires replacement or repair. Mitsubishi is
not liable for lost recordings.
TV Disc or A/V Disc Search
NetCommand is able to search to a specific time in a
recording on the TV Disc or an IEEE 1394 AiV Disc.
1. Start the desired track's playback on the AiV disc.
2. Use the number buttons to enter the time code
position of hours followed by minutes. For example,
to enter one hour and twenty-two minutes (1:22)
into the track, enter 1, 2, 2.
3. Press ENTER to skip to the time code position.
4. To cancel the request or to start over, press
CANCEL instead of ENTER.
Archiving TV Disc Digital Recordings
To permanently store a COPY FREE digital recording
from the TV Disc on D-VHS or other IEEE 1394 device:
1. Press DEVICE on the remote control and select TV
Disc by pressing ADJUST 4, I_, • or • and then
ENTER.
62
Using the Remote Control with TV Disc or A/V Disc
after selecting from the Device Selection menu:
GUIDE:
PLAY:
PAUSE:
FF/FWD:
REWiREV:
displays the Track List of recorded pro_rams.
resumes playback of paused pro_gram.
pauses or resumes playback of program.
forward picture search, multiple presses
increase the speed.
reverse picture search, multiple presses
ADJUST _:
ADJUST •:
ADJUST •:
REC:
skip backward 12 seconds per press.
skip forward 30 seconds per press.
skip to the end of the track.
skip to the beginning of the track.
Display the Record Menu to schedule
recordings
If the TV Disc is the default digital record device
(NetCommand menu), you can also schedule
recordings from ChannelView.