Time Menu - Mitsubishi Electric HD-6000 Owner's Manual

Time Menu
Setting the CJock
You may choose to manually or automatically set the
chock that your HDTV receiver/controller will use for
recording or timer functions. You cannot schedub
recordings if the chock is not properiy set.
Figure 16
To manually set the chock, you need to sebct the
current time, inciuding AM or PM, current date, time
zone for your area and the Dayiight Savings time
setting.
Figure 16. Time Menu, Manual Clock Setting
Set Time
Press ADJUST • or V repeatedly to slowly select
the hour or press and hold to quickly select the hour.
Press ENTER to move to the minutes options. Press
ADJUST • or • to select minutes, then press ENTER
to select AM or PM.
Set Date
Press ADJUST • or • to sebct the correct date.
Time Zone
Sebct your correct time zone. Press ADJUST • or • to
sebct the time zone (Afiantb, Eastern, Centrai, Mountain,
Pacific, Alaska or Hawaii) for your area. Then press
ADJUST _' to move to the Daylight Savings time option.
Daylight Savings Time
Select the Daylight Savings time (DST) option that your
state uses. Press ADJUST • or • to select Applies if
your state or area uses DST, or Ignore if DST does not
apply.
Auto
Select the Time Zone and Daylight Savings time setting,
as noted above. You may then tune to a channel
(on Ant-1 or Ant-2) that uses Extended Data Service
(XDS) time data, typically a PBS channel. The Auto
selection will automatically retrieve the correct time
and date information from this channel. Be aware that
74
if a channel displays incorrect time information, it is
because of information sent from the broadcaster and
is not a defect of the HDTV receiver/controller.
Timer On/Off
Figure 16
The timer can be turned to On or Off. When On, you
need to select the time and day to turn the TV On and
the device and channel to display. At your presebcted
time, the timer will turn the HDTV receivericontrolbr
On, and this message will be displayed: "Press a
button for the HD-6000 to stay on". Press any button
on the remote control within 5 minutes or the HD-6000
will turn itself Off.
Set Time
Press ADJUST • or • repeatedly to slowly select
the hour or press and hold to quickly select the hour.
Press ENTER to move to the minutes options. Press
ADJUST • or • to select minutes, then press ENTER
to select AM or PM.
Set Day
Select the day or days that the HDTV receiver/
controller will turn on automatically. Press ADJUST
• or • to select Everyday, Mon-Fri (Monday through
Friday), or the individual days of the week.
Figure 17. Timer Menu (Timer On/Off)
Press ADJUST • or • to select the device to use
when the timer turns on the HD-6000. If the HD-6000
is already on, the timer wiii turn the TV to this selected
device.
When an antenna _sthe selected device, you may
select any memorized channel. Press ADJUST • or •
to select the channel and the HDTV receiver/controller
wiii tune to this channel in memory when the timer turns
it on. This includes sub-channels for digital choices.