Dvd Puayer With Component Video; Dispjay Monitor With Component Video - Mitsubishi Electric HD-6000 Owner's Manual

Connecting a DVD Player with Component Video or a
Display Monitor with Component Video
DV[::) PJayer with Component Video
Figure 14
Component video cabtes and audio cables are required. These are not included with the HDTV receiveffcontrotler.
1_ Connect the Component Video cabHes from _1Pr/Pb VIDEO OUT on the back of the DVD pHayerto COMPONENT-
1 on the HDTV receiver/controller back paneH, matching the correct connection:
Y to Y (Green), Pr to Pr (Red), Pb to Pb (Btue)
2_ Connect a set of audio caMes from AUDIO OUT on the back of the DVD pHayer to COMPONENT-1 AUDIO Input
on the HDTV receiver/controller back panel The red cabHe connects to the R (right) channeH, and the white cabHe
connects to the L (left) channel
IMPORTANT
ppendix B for component
signal compatibility
For digital audio connections, see
your DVD Owner's Guides.
Figure 14. Connecting a DVD Player with Component Video
Note: NetCommand® will assume you connected your DVD pHayerto Component-1. If you add a second
DVD or use any other inputs for your DVD, this change must match in the NetCommand system. See Edit
NetCommand... in Chapter 3 for more information_
DispJay Monitor with Component Video
Figure 15
Component video cables and audio cables are required. These are not included with the HDTV receiver/controller.
1_ Connect the Component Video cables from Y/Pr/Pb VIDEO INPUT on the back of the Display Monitor to OUTPUT
to Display (Y/PbiPR) on the HDTV receiver/controller back panel, matching the correct connection:
Y to Y (Green), Pb to Pb (Blue), Pr to Pr (Red)
2_OPTIONAL: To use the speakers built in or connected to the display monitor, connect a set of audio cables from
OUTPUT to Display on the back of the HDTV receiver/controller to AUDIO INPUT on the back of the display
monitor. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel. If
you are also using the OUTPUT to Display to connect to your AV Receiver as shown on page 22, then use RCA
"Y" splitter cables_
Figure 15. Connecting a Monitor with Component Video
26