Mitsubishi Electric HD-6000 Owner's Manual page 70

High definition receiver/controller
Hide thumbs Also See for HD-6000:
Table of Contents

Advertisement

Setup
Menu, continued
forward to catch up to the Hivebroadcast.
In the
AHways setting, the PIP/POP features are not
avaiHaMe and channeH changing will be shower. To
use the PPiPOP features, seHect the Off or On
Request setting for TV Pause.
Off:
This mode prevents the TV Pause function,
however, full screen picture freeze is avaiHabHe. If
you do not expect to use the TV Pause features,
we recommend the Off or On Request mode.
This
mode allows PIP/POP features to be used.
Figure !0, TV Pause slider
Side Bar CoJor
For some TV formats sidebars are visibHe (see TV
DispHay Formats, pages 85-86).
You can choose to
dispHay these sidebars in gray or bHack. When used
with an LCD, DLP or LCOS TV, Mack is recommended.
When used with a CRT or pHasma dispHay, gray is
recommended
to avoid burn in.
Software
Version
For some service related issues, it may be necessary
to know which software version is in your TV. This
information
is displayed on the Setup menu screen.
Controlling
the TV Pause Features:
NOTE: You cannot reverse search further back
than the beginning of the filled space as shown on
the slider. You cannot forward search past the live
broadcast
point.
Press PAUSE to pause the current TV program.
Press PLAY to resume watching the TV program
from the pause point.
Press FF to forward picture scan. Press up to
4 times to increase the scan speed.
If pressed
when TV is paused, then will forward scan, not
fast forward.
Press REW to reverse picture scan. Press up
to 4 times to increase the scan speed, pressed
when TV is paused, then will reverse at half
speed.
Press ADJUST 4 to skip backwards
12 seconds
(for each press).
Press ADJUST _ to skip forward 30 seconds (for
each press).
Press ADJUST A to skip all the way to live
broadcast.
Press ADJUST V to skip back to the earliest
available part of the TV program as shown on
the slider.
If you wish to save this program press REC to display
the record menu and begin a formal recording.
You
can use ChannelView to setup a formal recording by
pressing GUIDE.
7O

Advertisement

Table of Contents
loading

Table of Contents