Add Devices - Mitsubishi Electric HD-6000 Owner's Manual

Edit NetCommand ®, Add Devices
MitsubishVs NetCommand allows you to edit your home theater configuration. You can add new devices, change
device settings and connections, debte devices and barn remote controi IR signais not akeady in NetCommand
memory.
Edit NetCommand Screen
Figure !3
If you sebcted Edit when you were at the Finish screen,
the Edit NetCommand screen dispiays. The choices
are:
time by pressing TV MENU, then sebcting
NetCommand. See page 69 for detaiis.
Use these settings to change the NetCommand setup
to reflect a change in your home theater system. To
barn the remote controi IR signais of a device that
is not akeady in the NetCommand memory, add this
device as manufacturer of "Other". The barning
screens will then automatically be included in the
series of screens used for adding the device.
Figure 13. NetCommand Menu, Edit NetCommand Option
Add Screen
Figure 14
Select "Add" from the Edit NetCommand screen, and
the New Device screen will display. Select the Device
type that you would like to add. You may add your
AiV receiver (if not added in Initial setup) Cable Box,
Camcorder, DBS, DVD, Laser Disc, PC and VCR.
Add:
Add a new device to the NetCommand setup. See
Figure 14 for more information.
Change the brand/model or input connections of a
device already listed in the configuration. Learn the
remote control signals of devices listed as "Other"
brands. See Figure 23 for more information.
Review:
View a list of all devices and input connections in the
NetCommand home theater configuration. This is also
where you can turn On or Off unused HDTV receiver, /
controller inputs or devices. See Figure, 4 for more
information.
Delete:
Remove a device or erase the complete NetCommand
home theater configuration. The learned remote
control signals are erased when the associated device
is deleted. See Figure 25 for more information.
At the next screen, choose the manufacturer. If you
choose "Other" for the manufacturer, the device (AiV
receiver, Cable, DBS, DVD or VCR) can be learned.
For device types Laser Disc, Camcorder, Game
and PC, the "Learn" screen is skipped. There is no
NetCommand support or learning for these devices.
At the next screen, you can keep the default Name or
select a custom Name for the device, using ADJUST
A or V to select letters A-Z, numbers 0-9, and/or
symbols (!.&'/:*- and blank) for each character of the
name you would like for the selected channel.
The next screen displays the Connection screen (RF
Connection for Cable, Figure 21). Select the HDTV
receiver/controller and A/V receiver inputs that the
device is connected to. Only audio can be connected
to the AiV receiver. The AiV receiver may need
configuring for digital audio.
initial:
Start the setup at the beginning. This button
only becomes available after deleting the entire
configuration, or if NetCommand was not set up when
the HDTV receiver/controller was first powered On.
If you select Initial, the first screen that wiii display
is the Device Setup Screen. See Figure 3 for more
information.
Note: If you have completed the NetCommand
setup, you can access the Edit menu at any
48
Figure 14. Add screen