Pc Viewing - Mitsubishi Electric HD-6000 Owner's Manual

PC Viewing
PC Input
Figure 16
Display
1. Connect the PC to the HDTV receivericontroHHer's
back paneHas shown in the connection chapter of
this guide. If you are connecting to a LT-4260 LCD
TV, foHHow those specific instructions.
2. Add the device in the NetCommand menu.
3. SeHect the PC through the Device SeHection menu.
Resolution
For the correct screen resoHution (pixeHs), whiHe the PC
is dispHayed on-screen, use the PC's ControH PaneH
settings, as shown bellow (for most PC's). Your TV can
dispHay onHystandard VGA (640 x 480) 60Hz refresh rates
onHy.
1. In the PC's "Start" menu, seHect "Settings".
2. SeHect "ControH PaneH'.
3. SeHect "DispHay'.
4. Choose the "Settings" tab.
5. Depending on your PC, either:
Use the screen area sHider or use the Screen
ResoHution sHiderto adjust the resoHution.
You may need to restart the PC for this change to take
effect.
IMPORTANT
I_ you are using the HD=6000 with the LT-4260
LCD HDTV display, you cannot use the PC input
on the HD=6000. Use the PC input on the TV's
display panel.
7{'_ I
Figure 16, Selecting VGA resolution for a PC
(}4