Using The Device Menu Button To E)Ispuay Menus; Using Tv Disc & A/V Disc - Mitsubishi Electric HD-6000 Owner's Manual

Using the Device Menu Button to Display Menus
Device Menu
If NetCommand is setup, pressing the remote control's
DEVICE MENU button displays the transport menu
if the input is a VCR or DVD. Another press of the
DEVICE MENU button wiii display menu for the current
device source, if available.
Figure 9, Transport menu
IR Controlled Devices
For a NetCommand compatible traditional IR
controlled device, pressing DEVICE MENU once or
twice will display the menu for that device. While the
menu for the device is displayed, press ADJUST
_, b', • or • and ENTER to navigate the screen. For
some NetCommand traditional devices you will also be
able to use the number buttons and other additional
buttons on the HDTV receiver/controller remote.
For traditional DVD players, DEVICE MENU is also
known as the setup menu.
CableCARD
TM
Menu
FigurelO
When using a CabieCARD, pressing DEVICE MENU
wiUldisplay a list of up to 8 links to applications that
contain basic CableCARD information made available
from your cable provider. Press ADJUST • or • to
move through the application links. To select a link
(blue text) to an application, press ADJUST • or •
to highlight the link, then press ENTER to access the
linked page. Pressing DEVICE MENU will return to
the CableCARD menu screen and pressing HOME will
If there are technical problems with the CableCARD,
an error screen wiii automatically display with
information that may be needed by your Cable
provider when you call them for assistance.The screen
shown below is an example of the type of screen that
may display. Specific screen menus are sent by your
cable provider.
Moving Through Other CableOARD Screens
In addition to CableCARD menus, other CableCARD
application screens may display and require you
to make additional selections. While CableCARD
application screens are customized in each area, some
general rubs apply in using these screens with your
Mitsubishi HDTV receiver/controller.
Blue text denotes a link to another screen. Press
ENTER to move to the next application. When
screens do not have blue text, there are no more
links.
2. You cannot move backward through the links. If you
want to exit the CableOARD system, press HOME
to exit and return to TV viewing. CANCEL may not
apply to some CableCARD screens.
All information on these application screens is provided
by your iocai cable company. Please contact your
cable provider if you have any problems with the
application screen displays.
IMPORTANT
screens are status or
nostic in nature and do not allow you to
make changes. These screens are meaningful
_ly to your local cable provider.
i_i_! _!! i i_:_iiii! i_x!
TM
io _3(!i
Figure !0. Possible Device Menu for CableCARD
58