Configure Full Disclosure - GE MAC 5 A4 Operator's Manual

NOTE:
8. Select Save to save the changes.
9. Select the Detection Configurations tab to display the detection configurations
for critical conditions.
10. Enable or disable notifications when the critical conditions below are detected:
• STEMI Detection
• Ischemia Detection
• AV Block Detection
• Arrhythmia Detection
NOTE:
11. Save and close the screen.
The Acquisition screen displays.

Configure Full Disclosure

Before you start this procedure, make sure that:
• The FLDS - Full Disclosure option is enabled on the device. Contact a GE
Healthcare Service Support representative to enable this option.
• Your user role is assigned the privileges to access the Settings screen. See
Configure User Roles on page
5864335-001-1
By default, critical value notifications are enabled. If you do not want to be
notified when a threshold for a specific critical value has been met, disable
the Status setting for the corresponding critical value.
By default, notifications are enabled.
MAC ™ 5 A4/MAC
209.
™ 5 A5/MAC ™ 5 Lite
Configure Settings
151