Configure Lead Sets - GE MAC 5 A4 Operator's Manual

Field
12SL
Interpretation
Print Only if
Abnormal
7. Select Add.
A new row is added to the report configuration table.
8. Repeat steps
9. To edit an existing report printing configuration:
a)
b)
c)
10. To delete an existing report printing configuration:
a)
b)

Configure Lead Sets

The device includes the default lead set configurations below:
5864335-001-1
Action
Enable or disable
this setting.
Enable or disable
this setting.
to to add more report printing configurations.
5 7
To enable the edit mode, select anywhere in the row of the report printing
configuration that you want to modify.
Make changes to the configuration as per the information in
Report Printing Settings on page
Select Save.
Select the Delete icon
delete.
NOTE:
You can delete only one report printing configuration at a time. To delete
more than one report printing configuration, repeat this step.
Select Save.
MAC ™ 5 A4/MAC
Description
Displays or hides the 12SL analysis in the ECG report.
Default value:
• Not applicable for 1 by 10s @25mm/s, 1 by 10s
@50mm/s and Expanded media 12ld formats.
• Disabled for all other formats.
If you enable this setting, an ECG report prints only if the
12SL analysis indicates that it is abnormal.
If you disable this setting, all ECG reports print.
Default value:
• Not applicable for 1 by 10s @25mm/s, 1 by 10s
@50mm/s and Expanded media 12ld formats.
• Disabled for all other formats.
144.
for the report printing configuration you want to
™ 5 A5/MAC ™ 5 Lite
Configure Settings
Table 38:
145