GE MAC 5 A4 Operator's Manual page 330

Configure the MUSE System for Network Communication
Field
Device Friendly Name
Server Port
Network Interfaces
Server Addresses (MUSE v9 only)
7. Click OK to save your changes or Close/Cancel to ignore your changes.
8. If any configuration changes were made, restart the MUSE DCP Inbound service
on the MUSE Application server.
330 MAC ™ 5 A4/MAC ™ 5 A5/MAC
Description/Action
This is the name the compatible device will see
when searching for the DCP server. The default is
MUSE. Change this if desired.
This is the port on which the DCP Inbound service
is listening for inbound connections. The default is
9240. Change this if necessary.
This is where you can specify which network
interface the DCP Server should listen on. This field
is blank by default so it will listen on all network
interfaces on the MUSE application server. To
configure the DCP Server to listen only on a single
network interface, for example IPv4, you can type
the IPv4 IP address into this field.
This is a read-only output indicating the Server
Address(es) that the DCP Inbound service is
currently listening on. This is the full DCP URL
that can be used to define this MUSE system on
a compatible DCP client device such as a MAC
2000. Multiple server addresses may be listed if the
Network Interfaces' field is blank.
™ 5 Lite 5864335-001-1