GE MAC 5 A4 Operator's Manual page 230

Configure Settings
2. Configure the wired network settings as per the information in the table.
Table 74: Configure a Wired Connection
Field
Network
Status
Obtain IP
Address
Automatically
IPV4 Address
230
Action Description
Enable or disable •
this option.
•
Default value: Enabled
Enable or disable Automatically obtains the IP address.
this option.
•
•
Default value: Enabled
Enter the static This field is enabled to modify if Obtain IP Address
IPV4 address for Automatically is disabled.
the device.
No default value
Allowed values: A valid IPV4 address
MAC ™ 5 A4/MAC ™ 5 A5/MAC
If this option is enabled, the LAN connection to the
device is enabled.
If this option is disabled, the LAN connection to the
device is disabled. The remaining fields are disabled.
If this option is enabled, the device automatically
obtains an IP address (DHCP) to communicate with
the LAN. The remaining fields are read-only and the
values cannot be changed.
If this option is disabled, the fields to configure
the IPV4 Address, Subnet Mask, Gateway Address,
Primary DNS, and Secondary DNS, if any, to
communicate with the LAN are made active to
change the values. Specify these values in the
respective fields.
™ 5 Lite 5864335-001-1