Configure Settings
Field
EAP Phase 2
Anonymous
Identity
User Name
Password
CA Certificate
Client
Certificate
236
Action
Description
Select a value
This field is available only when EAP Phase 1 is
from the drop-
configured as PEAP or TTLS.
down list to
Default value: MSCHAPv2
configure EAP
Phase 2.
Allowed values:
•
•
Enter the
Default value: No default value
Anonymous
Allowed values: Any value (up to 256 characters)
identity.
NOTE:
Enter the user
Default value: No default value
name.
Allowed values: Any value (up to 256 characters)
Enter the
This field is available only when EAP Phase 1 is
password.
configured as PEAP or TTLS.
Default value: No default value
Allowed values: Any value (up to 256 characters)
Enable or disable
Only PEM encoded certificate is supported.
this setting.
This field must be enabled when EAP Phase 1 is
configured as TLS and cannot be disabled, and optional
when EAP Phase 1 is configured as TTLS or PEAP.
If CA certificate is enabled, make sure that the CA
certificate is installed. See
page
Default value:
•
•
Enable or disable
Only PEM encoded certificate is supported.
this setting.
This field must be enabled when EAP Phase 1 is
configured as TLS and cannot be disabled, and optional
when EAP Phase 1 is configured as TTLS or PEAP.
If Client Certificate is enabled, make sure that the client
private key and client public key are installed. See
Wireless Certificates on page
Default value:
•
•
MAC
™
5 A4/MAC
™
5 A5/MAC
MSCHAPv2
GTC
The default industrial standard for wireless
networks is anonymous all lowercase unless the
user has created a custom Anonymous Identity.
Install Wireless Certificates on
239.
Disabled, when EAP Phase 1 is configured as TTLS or
PEAP
Enabled, when EAP Phase 1 is configured as TLS
239.
Disabled, when EAP Phase 1 is configured as TTLS or
PEAP
Enabled, when EAP Phase 1 is configured as TLS
™
5 Lite
Install
5864335-001-1