GE MAC 5 A4 Operator's Manual page 190

Configure Settings
If the MAC 5 device is set for LDAP authentication and Order Management with
the MUSE system, when a user authenticates through LDAP, the MAC 5 connects
to the MUSE server through MUSEAPI3. It checks if any users in MUSE User Setup
have a Windows username that matches the user that logged into the MAC 5
device.
• If the users match, the MAC 5 will get the MUSE User ID for that user in the
• If a matching user is not found, the Technician ID field on the MAC 5 test
When a matching user is not found in the MUSE system, the error No user found
for userName="x", where x is the username entered at the MAC 5 device, logs in
the MUSE application log.
If you use the Default domain, a user can login to the MAC 5 with the username
instead of the domain\username format.
If a user does not enter their username as domain\username, the MUSEAPI3
user lookup call will not find the user.
Install MUSE SSL CA Certificate
Before you start this procedure, make sure that:
• You obtain the required certificate in the PEM format from your IT department and
copy it to the root folder of a USB flash drive for installation.
• The Enable External USB Storage is enabled in Settings > System > Storage
setting. If this setting is not enabled, access to USB flash drives is blocked.
• You enable at least one USB port in Settings > Hardware > USB Port setting. If this
setting is not enabled, the device will not recognize the USB flash drives.
1. Connect the USB flash drive containing the CA certificate to the device.
2. Select Settings > Workflow > Order Manager.
3. Select MUSE to view the MUSE server settings.
190
Technician ID field on the MAC 5 test entry screen.
entry screen is not filled.
MAC ™ 5 A4/MAC ™ 5 A5/MAC ™ 5 Lite 5864335-001-1