GE MAC 5 A4 Operator's Manual page 28

Equipment Setup
The paper spacer placement depends on the paper size.
If the paper
size is
A4
Modified
letter
Make sure that the paper spacer is applied at the correct position.
4. Push the printer door to its closed position and verify that the unit is closed.
5. Carefully flip the device to display the bottom.
6. Move the paper latch at the bottom of the device.
The paper latch placement depends on the paper size.
28
Then
Put the paper spacer at the inside slot of the printer head.
Put the paper spacer at the outside slot of the printer head.
MAC ™ 5 A4/MAC ™ 5 A5/MAC ™ 5 Lite 5864335-001-1