GE MAC 5 A4 Operator's Manual page 211

Table 66: Configure User Roles
Field
Role Name
Access Settings
Activate ECG Simulator
Access Service
View Audit Logs
View Reports
View Orders
Edit Reports
Delete Reports
Transmit Reports
5864335-001-1
Description
Enter the unique name of the user role. Up to 15 characters
are allowed.
Access the Settings screen and view the newtork parameters
upon selecting the network status icon.
NOTE:
If this privilege is disabled:
• The Activate ECG Simulator, Edit Critical Value
Settings, and User Management privileges are also
disabled.
• You can only view the network status upon selecting
the network status icon, but cannot view the network
parameters such as Device Name, IP address, Subnet
Mask, MAC address, Gateway address, and DNS.
Access to activate the ECG simulator.
NOTE:
If this privilege is enabled, the Access Settings privilege is
also enabled.
Access the Service screen.
NOTE:
If this privilege is disabled, the Software Update and
View Audit Logs privileges are also disabled.
View audit logs.
NOTE:
If this privilege is enabled, the Access Service privilege is
also enabled.
View patient reports previously stored in the Files view.
NOTE:
If this privilege is disabled, a user can only view patient
reports that acquired during their current login session.
View orders in the Orders view.
Edit stored patient reports.
NOTE:
If the user only has edit patient report privileges and
not viewing patient report privileges, they can only edit
patient reports they acquired.
Delete stored patient reports.
Transmit patient reports.
MAC ™ 5 A4/MAC ™ 5 A5/MAC ™ 5 Lite
Configure Settings
211