Configure Network Printer - GE MAC 5 A4 Operator's Manual

Table 53: Configure Transmission Modes
Field
Default
Auto
NOTE:
3. Select Save.

Configure Network Printer

To configure a network printer, make sure the NETP - Network Printer option is
purchased and enabled in the Option Manager.
1. Select Settings > Workflow > Network Printer.
The network printer setting screen displays.
User Interface on A4 and A5 devices
5864335-001-1
Action
Enable or disable
this setting.
Enable or disable
this setting.
You can configure only one transmission mode at a time.
MAC ™ 5 A4/MAC
Description
If this setting is enabled, all generated patient reports
are sent to this destination by default.
A destination can be both the default and automatic
destination.
Default value: Disabled
If this setting is enabled, all generated patient reports
are automatically sent to this destination.
A destination can be both the default and automatic
destination.
Default value: Disabled
NOTE:
When Auto is enabled for transmission and user
does not have Transmit Report privilege, the
report will not be transmitted.
™ 5 A5/MAC ™ 5 Lite
Configure Settings
183