GE MAC 5 A4 Operator's Manual page 113

Resting ecg analysis system
Table of Contents

Advertisement

To transmit the report(s) ...
To another configured
destination
The selected patient reports are added to the Queue, processed and transmitted
to the selected destination. The Job Status can be viewed in the Queue. See
Display the Report Queue on page
If you select patient reports for transmission from the expanded Files list, the
message displays on the notification area in the lower, right-side of the screen:
<Count> reports added to the queue, where <Count> is the number of selected
reports.
If you select patient reports for transmission from the collapsed Files list, the
message displays on the notification area in the lower, right-side of the screen:
<Destination_Name>: <Job_Status>.
For example, if the destination name is USB, and the job status is Failed, the
status displays as follows: USB: Failed.
A tick mark displays in the Sent column of the Files expanded list for patient
reports successfully transmitted to the default destination.
If
The transmission queue has reached its
maximum limit of 1,000 reports, a message
displays in the notification area that the
transmission queue is full and no additional
reports can be added.
One or more patient reports have been
transmitted to the selected destination, a
message displays in the notification asking
you to confirm if you want to re-transmit the
already transmitted reports.
5864335-001-1
Perform the following:
1.
Select anywhere around the ellipsis icon on the lower, left-
side of the screen to expand the Transmit menu.
2.
From the expanded Transmit menu, select any configured
destination to transmit the patient report(s).
3.
Select the Transmit icon:
One or more destinations must be configured for the Transmit
icon to be enabled. If no destinations are configured, the
Transmit icon is disabled.
121.
Then
Wait for the reports in the queue to transmit
and try again.
Perform one of the actions below:
  MAC
5 A4/MAC
5 A5/MAC
Select OK to re-transmit the patient
report.
Select Cancel to cancel the report
transmission.
5 Lite
Work with the Files List
 113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mac 5 a5Mac 5 lite

Table of Contents