Service Options - NorthStar 941X Reference Manual

Service Options

serial number
Rev. D
Refer to "Programming the Output Ports," on page 115, for detailed in-
formation on how to interface your 941X with other equipment.
To view your 941X's serial number and hardware specifications, press
the STAR key until the USER CUSTOMIZATION screen is displayed.
Press the SERVICE INFORMATION menu key to display the following
screen:
(SERVICE INFORMATION) (SERVICE INFORMATION) (SERVICE INFORMATION) (SERVICE INFORMATION)
In addition to being affixed to the back of the unit, your 941X's serial
number is permanently programmed into memory at the factory. Serial
numbers ending with the letter "D" indicate that the unit contains an
internal DGPS beacon receiver. Be sure to have your 941X's serial num-
ber and software version available (see below) whenever contacting, or
corresponding with, your Northstar dealer or the factory.
8 — Customizing the 941X 8 — Customizing the 941X 8 — Customizing the 941X 8 — Customizing the 941X Page 91