Table of Contents
Advertisement
4. Press the cursor pad up or down to select the desired data for that
gauge. To remove a gauge from the screen, select " – None – "
from the list.
5. Press ENTER .
Continue for each gauge you want to change.
If you are configuring a gauge for data that applies to two engines, con-
figure it for one side and the same gauge data will be shown on the
opposite side of the screen.
6. When finished, press Return .
To set the color of the background:
1. Display any SmartCraft screen as described above.
2. Press Background repeatedly until the desired color is displayed.
Selecting day mode or night mode:
1. Display any SmartCraft screen as described above.
2. Press Config .
3. Press Day mode or Night mode , as appropriate.
Other SmartCraft options
Other, less used, SmartCraft options are accessed by pressing the
STAR key several times to display the Setup / Options screen.
You can read more details about these functions in the Setup
and Calibration section of this manual. A summary is given
below.
On this screen, press SmartCraft options... to display the Smart-
Craft options screen. With this screen, you can turn the main
SmartCraft display on or off and access engine faults and Smart-
Craft setup functions. The following menu keys are displayed:
– 6 –
GMSMCRFT Rev A
Advertisement
Table of Contents
