NorthStar 941X Reference Manual page 54

inserting
waypoints
creating new
waypoints
during route
entry
Page 46
To add waypoints to the route, press the INSERT menu key. A list of
stored waypoints is displayed.
Scroll the waypoint list up or down using the cursor keys to designate the
desired waypoint, and press ENTER. The selected waypoint is now in the
route.
Press the NEXT LIST menu key, if you wish, to select different
waypoints from the alpha
points cannot be used as waypoints in a route.)
Repeat for each waypoint you wish to enter.
You can insert a waypoint in any part of a route. Waypoints are always
inserted into the route at the point indicated by the arrow at the left of
the screen. Move the arrow so that it is halfway between the two existing
waypoints of the route where you want the new waypoint to be located.
Follow the "inserting waypoints" procedure above for inserting this new
waypoint into the route.
You can also create a new waypoint as you enter it into the route. After
pressing INSERT from the NEW ROUTE waypoints screen, press NEW
.from the SELECT WAYPT screen. Enter the name (with description, if
you wish) and coordinates of your new waypoint. Press ENTER. The new
waypoint is now part of the new route and stored among the waypoint
lists in the 941X's memory.
4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes
alpha, local local or saved saved lists. (Avoidance
alpha alpha local local saved saved
Rev. D