NorthStar 941X Reference Manual page 94

"
steer dist
precision
Page 86
The CROSS-TRACK FULL SCALE display formats apply only
to the STEERING screen, and not to the 3-D steer screen.
The options represent the entire distance limit on your screen, from
complete left to complete right. Therefore, a cross-track distance setting
of 1,000 feet will display 500 feet to either side of your track line, while a
choice of ½ mile will display limits of ¼ mile to either side, and so forth.
To change the setting, press the EDIT menu key and use the up/down
cursor keys to scroll through the available choices. Press ENTER when
you are done, or CLEAR to leave the option unchanged. If necessary,
modify the DISPLAY OPTION setting to enable your choice of either
feet or meters in the cross-track display.
(NAVIGATION OPTIONS) (NAVIGATION OPTIONS)
(NAVIGATION OPTIONS) (NAVIGATION OPTIONS)
The STEER DIST PRECISION function offers an extra level of accuracy
to the distance-to-waypoint display on the STEERING and 3-D STEER
screens. Situated in the upper-left portion of the screens, the distance-to-
waypoint is normally displayed in tenths of miles or kilometers.
By changing the STEER DIST PRECISION option from NORMAL to
HIGH, the distance-to-waypoint display will increment in feet or meters,
once you have come within 1.0 mile or kilometer of the destination way-
point.
8 — Customizing the 941X 8 — Customizing the 941X 8 — Customizing the 941X 8 — Customizing the 941X
NOTE
Rev. D