Using Gps - NorthStar 941X Reference Manual

Using GPS

lat/lon
coordinates
time of day
speed and
course
Rev. D
You may also choose to freeze the track, so that no more points will be
stored and the track will remain unchanged.
Pressing the CLEAR TRACK menu key clears the track history displayed
on the screen.
Press the RETURN menu key to go back to the plotter screen.
Your 941X contains an internal GPS receiver which is used as the pri-
mary source of position data.
GPS data is displayed directly on the GPS POSITION screen.
The GPS position screen displays your latitude and longitude in large
digits near the top of the screen. If GPS data is not available, dashes are
displayed in place of the numbers.
You can display lat/lon as either degrees, minutes and seconds,
or as degrees, minutes and thousandths of minutes. See
"Display Options," on page 78, to select one or the other.
The time of day and today's day and date (obtained from the GPS satel-
lites) are displayed at the bottom of the screen.
Near the bottom of the screen, your Speed-Over-Ground and Course-
Over-Ground are displayed in large digits.
3 — Basic Navigation 3 — Basic Navigation
3 — Basic Navigation 3 — Basic Navigation
Page 25