NorthStar 941X Reference Manual page 127

Rev. D
will be output are followed by the word ON. Those that will not be output
are followed by two dashes, signifying that they are turned OFF.
1. Move the cursor arrow to the sentence you wish to change and
press the EDIT menu key.
2. Use the up/down cursor keys to toggle the sentence ON or off
(dashes) and press ENTER to make your selection, or CLEAR to
leave it unchanged.
3. Repeat for each sentence requiring modification. Press the
RETURN menu key to go back to the PORT SETUP screen when
you are done.
If you wish to set all sentences to the factory defaults for recommended
output, press the SAFE RESET menu key.
The ALL OFF menu key enables you to conveniently turn off all sen-
tences in the event you wish to then turn on only a select few for output.
9 — Installation and Interfacing 9 — Installation and Interfacing
9 — 9 — Installation and Interfacing Installation and Interfacing
Page 119