NorthStar 941X Reference Manual page 59

inserting
waypoints
removing
waypoints
editing a route
you are
following
"
other waypoint
functions
Rev. D
To insert a new waypoint, use the up and down cursor keys to move the
pointer to the spot between the two existing waypoints where you want
to make the insertion, and press the INSERT menu key. A screen listing
waypoints is displayed.
Move the cursor to select the waypoint from the displayed list, and press
ENTER. You will see the selected waypoint now in your route.
To remove a waypoint from the route, use the up and down arrow keys to
move the pointer to the waypoint, and press the REMOVE menu key,
and then ENTER.
If you make changes to a route you are currently navigating along, re-
member that the modified route is stored back in the 941X's memory,
but these changes do not appear in the copy of the route the 941X is fol-
lowing.
To make these changes take effect, you must start following the route
again (see page 59).
To display each waypoint's coordinates instead of its name and descrip-
tion—while editing or creating a route—press the NAME/COORD menu
key.
4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes Page 51