NorthStar 941X Reference Manual page 46

waypoint
coordinates
"
Page 38
Waypoint coordinates can be entered as lat/lon coordinates, loran TDs,
or as distance and bearing from your present location or from any way-
point in the 941X's memory.
To change the coordinate type from what is currently displayed, press
the COORD TYPE menu key until you see the option you want.
Enter the waypoint coordinates as previously described on page 36. If
you make a mistake, press CLR to erase any characters from the line and
start over; otherwise, press ENTER when the screen is correct.
If you are entering coordinates as distance and bearing, the 941X nor-
mally asks for these coordinates relative to your current position, known
as "–HERE–."
To select an entirely different location from which distance and bearing
are to be measured, such as an existing waypoint, press the FROM menu
key. A waypoint list is displayed. You can press the NEXT LIST or
COORD OPTION menu keys to help select the waypoint.
Use the up and down cursor arrow keys to point to the desired waypoint.
Press the ENTER key to designate this waypoint and return to the previ-
ous screen. If you wish instead to use your present position as the refer-
ence point, press the FROM 'HERE' menu key on the 'FROM'
POSITION screen.
4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes 4 — Creating Waypoints and Routes Rev. D