Automatic Operation Mode; What Is Automatic Operation Mode - Mitsubishi Electric MELSERVO-J2 Series Instruction Manual

4. OPERATION

4.2 Automatic operation mode

4.2.1 What is automatic operation mode?

(1) Command system
After selection of preset point tables using the input signals or communication, operation is started by
the forward rotation start (ST1) or reverse rotation start (ST2). Automatic operation has the absolute
value command system and incremental value command system.
(a) Absolute value command system
As position data, set the target address to be reached.
Setting range:
999999
(b) Incremental value command system
As position data, set the moving distance from the current address to the target address.
Setting range: 0 to 999999 [ 10
Current address
Position data
Downloaded from ManualsNet.com
999999 to 999999 [ 10
Position data setting range
STM
[ 10 m]
STM
Target address
|target address - current address|
search engine
m] (STM feed length multiplication parameter No.1)
STM
999999
m] (STM feed length multiplication parameter No.1)
4 - 5