Mitsubishi Electric MELSERVO-J2 Series Instruction Manual page 264

Print Data *Manual Number Revision
Jun.,2006 SH(NA)3179-F Section 3.3.2 (1) PG,NG deleted
Initial value " 1 " of proximity dog(DOG), parameter No.8
is modified
Section 3.5 CAUTION added
Section 3.7.2 Description of U,V,and W terminal added
Section 3.7.3 (3) CAUTION added
Section 3.8.1 POINT added
Section 3.8.2 CAUTION added
Section 3.9 CAUTION added
Section 3.11 Bar terminal changed
Section 4.1.1 (1)(d) Sentence changed
Section 4.1.2 CAUTION added and changed
Section 4.1.2 (2)(f) Position data for home position return changed
Section 4.2.1 (3)(c) Sentence changed, "feed length mulltiplication(STM)" in table
deleted
Section 4.2.2 (2) "Automatic/manual selection(MD0)" in table added
Section 4.2.3 (2) "Automatic/manual selection(MD0)" in table added
Section 4.3.2 (1) "Parameter No.13, 1" in table deleted
Section 4.4.2 (1) Position data for home position return changed
Section 4.4.2 (3) "ST2" in diagram added
Section 4.4.3 (1) Position data for home position return changed
Section 4.4.3 (2) "ST2" in diagram added
Section 4.4.4 (1) Position data for home position return changed
Section 4.4.4 (2) "ST2" in diagram modified
Section 4.4.5 (1) Position data for home position return changed
Section 4.4.5 (2) "ST2" in diagram modified
Section 4.4.6 (1) Position data for home position return changed
Section 4.5 CAUTION added
Section 5.2.1 POINT changed
Section 5.2.4 Sentence changed
Section 6.2 (1) "Personal computer" in table changed
Section 7.4 (2) Sentence changed
Section 8.4 "JIS8 unit code" to "ASCII code" changed
Section 11.2.2 CAUTION added
Section 11.2.2 A.15,A.16,A.17,A.19, and A.20 changed
Section 11.2.3 CAUTION and POINT added
Section 13.1 Note added
Section 13.2 (1) Amount of heat generated by the servo amplifier: "At zero torque"
to "With servo off" changed
Sentence in Note 1 added
Section 14.1.1 (1) Note in table changed
Section 14.1.1 (2)(b) Formulas changed
Section 14.1.1 (3) POINT added
Section 14.1.2 (2) POINT added
Section 14.1.5 Sentence added
Section 14.1.5 (2) Connection example changed
Section 14.2.3 Sentence changed, Outline drawing changed
Section 14.2.6 (2)(d) Outline drawing changed
Section 14.2.8 Sentence added
Section 14.2.9 Outline drawing changed
Downloaded from ManualsNet.com search engine