FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
●
Appearance
Button
Appearance
2.5 Working Modes
The unit runs in one of the following modes based on the real-time working
conditions and load.
Table 2-2 Working modes
Working Mode
Dry mode (fan)
Wet mode (fan + spraying)
Hybrid mode (dry mode +
auxiliary cooling mode)
Hybrid mode (wet mode +
auxiliary cooling mode)
Issue 03 (2021-04-20)
DP port: connects to the display module.
DP Port
Connects to the display module for communication and
power supply.
SW Button
When the smart cooling product is shut down and the
admin user has logged in, if you hold down the button for
more than 10s, a red frame is added to the button that
involves a risky operation on the display module within 5
minutes. You can press and hold down the button for 10s
to enter the risky operation screen. Exercise caution
because a risky operation may affect system data.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Fan
Water
Status
Pump
Status
On
Off
On
On
On
Off
On
On
2 Product Description
Compressor
Status
Off
Off
On
On
25