Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 12-23 Removing the fan support
Step 9 Install the new fan on the fan support, push the fan and fan support, insert the
fan terminal, and secure the terminal using cable ties.
Step 10 Power on the unit, choose Maint > Wizard Startup on the home screen, and
commission the indoor fan to check that it works properly before you exit.
Step 11 Choose Maint > Performance Maint on the home screen and clear the total
runtime of the indoor fan.
Step 12 Tap Start on the home screen. Ensure that the unit is running normally without
any alarms.
----End
12.13 Replacing an Exhaust Fan
Prerequisites
●
●
●
Procedure
Step 1 On the home screen of the display module, tap Shutdown and turn off the unit
switch in the PDF.
Exercise caution because the unit is still energized after it is shut down on the
home screen of the display module.
Step 2 Open the maintenance door and beam for the fan to be maintained.
Issue 03 (2021-04-20)
A fan needs to be replaced.
A spare fan of the same model is available and functional.
Tools: protective gloves, Phillips screwdriver, diagonal pliers, cable tie,
operation platform
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Component Replacement
171
Advertisement
Table of Contents
