Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
12.18 Replacing a Fan Drive
Prerequisites
●
●
Context
Before checking and maintaining the device, ensure that the active power supply
to the device is disconnected and the drive has been placed without active power
supply for 10 minutes. Otherwise, electric shocks may occur.
Procedure
Step 1 On the home screen of the display module, tap Shutdown and turn off the unit
switch in the PDF.
Exercise caution because the unit is still energized after it is shut down on the
home screen of the display module.
Step 2 Open the maintenance door.
Step 3 Flip the clip on the fan drive to be replaced.
Step 4 Pull out the handle and remove the fan drive from the subrack.
Figure 12-41 Removing the fan drive
Step 5 Install the new fan drive and insert it into the corresponding slot in the power
distribution subrack.
Issue 03 (2021-04-20)
A drive needs to be replaced.
A spare drive of the same model is available and functional.
NO TICE
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Component Replacement
191
Advertisement
Table of Contents
