FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Step 9 Remove the pressure tubes and seal the holes.
----End
13.2.14 How Do I Check Whether Group Upgrade Is Supported
in a Scenario?
During group upgrade, the unit that is being upgraded is shut down and then
restarted. Ensure that the cooling capacity of the remaining units meets the
cooling requirements to avoid insufficient cooling capacity.
Table 13-1 Networking scenarios for group upgrade
Networking
Scenario
1
2
3
4
13.2.15 How Do I Change the Password?
Prerequisites
●
●
Procedure
Step 1 On the home screen, choose Settings > User Settings. The User Settings screen is
displayed.
Figure 13-15 User Settings screen
Issue 03 (2021-04-20)
Monitoring
System
Networking
FE monitoring
FE monitoring
RS485 monitoring
RS485 monitoring
If you need to change a password, log in as user admin or operator.
You can only modify the password of the current user.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Teamwork
Group Upgrade
Networking
Status
FE teamwork
Supported
CAN teamwork
Supported
FE teamwork
Supported
CAN teamwork
Not supported
13 FAQ
214