Account Setting - Mitsubishi Electric MELSEC Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.6.5 Account setting

Access to monitor screen (standard screen)
Access to user screen
Read of logging file or event history file by FTP operation
Device test from device monitor screen (standard screen)
Tag component test from tag data monitor screen (standard
screen)
Write from user screen (write parts) to tag component
Access to administrative menu (standard screen)
Read/write of user screen file by FTP operation
Read/write of user data file by FTP operation
Deletion of logging file or event history file by FTP operation
4 - 43
[Setting Purpose]
(a) Set the user authentication account that will be confirmed when accessing
the Web server module.
When accessing the Web server module, the following user authentication
screen ("Enter Network password" screen) appears.
(b) The following access authorities are available for the user account.
(Multiple access authorities can be selected for one account.)
1) Device write authority
2) Tag component write authority
3) Administrator authority
Depending on the given access authority, access to the Web server module
is enabled as indicated below.
Access
1 To the account of the normal user, the device write/tag component
write/administrator authority is not given.
[Start Procedure]
[Administrative menu]
setting No. to be edited, and click on Edit .
Access authority
Normal user Device write
( 1) authority
"Account setting" (Refer to (1))
"Edit Screen" (Refer to (2))
MELSEC-Q
Enter the account set in
the Account setting.
Tag component Administrator
write authority authority
: Accessible : Inaccessible
Select the account
4 - 43