Network Connection By Dial-Up (Modem, Adsl); Access Procedure - Mitsubishi Electric MELSEC Q Series User Manual

5 CONNECTING WEB SERVER MODULE TO NETWORK

5.2 Network Connection by Dial-up (Modem, ADSL)

5.2.1 Access procedure

GX Developer
Web server module
IP address, subnet mask:
Automatically obtained from DHCP server
A contract with an Internet service provider is required
prior to Internet connection.
Mount the Web server module to slot "0" of the base
unit and power the programmable controller ON.
Connect the Web server module to the personal
computer with a crossing cable.
On the following screens from the Administrative menu,
make network setting of the Web server module.
System setting
Dial-up setting
Account setting
Power the programmable controller OFF and connect
the Web server module to ADSL modem.
Power the programmable controller ON.
The network module is automatically linked to the
network at start-up.
Using address notification obtain the Web server
module's address.
Start a Web browser on the computer and access the
Web server module.
Monitor device data on the "Device monitor" screen.
5 - 8
This section explains the case where the Web server module is connected to the dial-
up-connected network using ADSL.
The following shows the procedure for access from the external device to the
programmable controller CPU when an ADSL modem is used for connection.
[System configuration for dial-up connection]
Start
E-mail setting
Address notification setting
Completed
A contract with an Internet service provider
Internet
is required prior to Internet connection.
Personal computer
ISP ISP
ADSL modem
IP address, subnet mask:
Automatically obtained from DHCP server
(1) Contract with Internet service provider
For PC's network setting for one-to-one connection,
refer to Section 4.5.
(2) Network setting of Web server module
For connection to ADSL modem, refer to Section 4.4.1.
(3) Network connection of Web server module
(4) Receiving the account notification by personal computer
(5) Access to Web server module
For device monitor, refer to Section 6.2.1.
MELSEC-Q
Personal computer
5 - 8