Mitsubishi Electric MELSEC Q Series User Manual page 322

6 FUNCTIONS
Item
FTP server name
Login user name
Login password
Confirm login password Sets the login password again to confirm the login password.
Directory path
Save
Back/Cancel
Select FTP setting No.
and click on Load
6 - 99
[Setting item]
Sets the FTP server name of the file transfer destination using the IP address or domain name.
Sets the login user name for the FTP server.
Sets the login password for the FTP server.
Sets the directory path of the FTP server.
Saves the setting.
The settings are updated when the "Update" button on the Setting update screen is clicked, the
programmable controller is powered off and then on, or the CPU module is reset.
Discards the changed setting and returns to the FTP setting screen.
Loads the parameters of the No. selected in FTP setting No. and displays them on the Edit
screen.
(a) FTP server name
1) Set the FTP server name using the IP address or domain name.
2) When the domain name is used for setting, make setting as described
below. ( )
 Enter all the host and domain into the FTP server name setting
column.
(Example) ftpserver.****.ne.jp
When using the domain name, it is required to set the DNS server in
"DNS server setting" of the system setting. (Refer to Section 4.6.3)
(b) Login user name
Set the login user name for the FTP server.
(c) Login password, Confirm login password
1) Set the login password for the FTP server.
2) To confirm the login password, set the login password again to
"Confirm login password".
(d) Directory path
Set the FTP server directory path on the FTP server.
Use "/" as the separation character of the directory.
POINT
(1) After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update
screen is clicked, the programmable controller is powered off and then on, or
the CPU module is reset.
(2) QCPU or RCPU cannot be set for using FTP server.
If the module is set, an "FTP server command execution error" (error code:
0807h) occurs when transferring files or executing FTPPUT/FTPGET instruction
using each function of Web server module.
Description
Host Domain
MELSEC-Q
6 - 99