Mitsubishi Electric MELSEC Q Series User Manual page 261

6 FUNCTIONS
Item
Component name
CPU name
Data type
Device
Display form
Operator
Operand
Save
Back / Cancel
Tag name
Select component
setting No. and click on
Load
6 - 38
POINT
(1) Before making component setting, it is required to make tag setting on the
"Edit screen (Tag setting)".
(2) If any component has a wrong device number in the component setting, the
other component that has a device of the same access target CPU will also
result in an error.
Reexamine the device numbers set in the component setting.
[Component setting]
Component
CPU name
name
A 01:Control CPU
B 01:Control CPU
C 05:QCPU001
[Tag data monitor]
Component
Value
name
01:A ERRFFFEh
02:B ERRFFFEh
03:C 100
(4) Edit screen (Component setting)
Set the access target CPU, data type, access device, etc.
[Setting screen]
[Setting Item]
Sets the component name. (within 16 characters)
Sets the access target CPU name.
Sets the data type to be collected.
Sets the device data.
Sets the display form of the real number.
Sets a mathematical operation to be performed for the collected data, or no mathematical
operation to be performed.
Set the numeric value to be mathematically operated for the collected data.
Saves the setting.
The settings are updated when the "Update" button on the Setting update screen is clicked, the
programmable controller powered off and then on, or the CPU module is reset.
Discards the changed setting and returns to the Tag setting screen.
Displays the tag setting No. and tag name being edited.
Loads the parameters of the No. selected in component setting No. and displays them on the
Edit screen.
Up to "setting number + 1" can be selected.
Device
D20000
Wrong device number.
D0
D100
Device number error (FFFEh)
As component "A" of the same access
target has an error, component "B" also
results in error.
Description
MELSEC-Q
6 - 38