Mitsubishi Electric MELSEC Q Series User Manual page 495

9 TROUBLE SHOOTING
Error
Error name
code
0810h E-mail setting file error
Incorrect e-mail
0811h
address No. error
E-mail address No.
0812h
non-setting error
E-mail transmission
0813h
error
0814h No attached file error
9 - 40
Error definition
The e-mail setting file is missing or
destroyed.
The e-mail setting is incorrect.
The e-mail address No. is outside
the setting range.
An e-mail sending request was
issued to the e-mail address No.
that has not been set in the e-mail
setting.
An error occurred during e-mail
transmission.
The specified attached file is
missing.
(From the previous page)
Corrective action
 After initializing the module (refer
to Section 4.13), perform the e-
mail setting (refer to Section
6.6.3) again.
 Correct the setting (SMTP server
name) (refer to Section 6.6.3).
 Check the e-mail address No. of
the logging setting (refer to
Section 6.4.4), event setting
(refer to Section 6.5.3) or
WMSEND instruction (refer to
Section 8.2).
 Check the e-mail address No. of
the logging setting (refer to
Section 6.4.4), event setting
(refer to Section 6.5.3) or
WMSEND instruction (refer to
Section 8.2).
 Check the e-mail setting.
(Refer to Section 6.6.3)
 Check the e-mail setting.
(Refer to Section 6.6.3)
 Check the connection with the
mail server.
 Check the mail server status of
the send destination.
 Check whether the Internet
service provider in use meets the
specification. (Refer to Section
2.4 (8))
 Select "This server has
authentication requirements
which have to be met" in the e-
mail setting, and set each item.
(Refer to Section 6.6.3.)
 Check the specification of the
attached file in the WMSEND
instruction.
(Refer to Section 8.2)
 Check that the attached file has
not been deleted.
 Check the logging setting.
(Refer to Section 6.6.5 (3).)
(Continued on the next page)
MELSEC-Q
Error type
Stop
Continue
Continue
Continue
Continue
Continue
9 - 40