Tag Event Monitor Status Area 2 (Address: 3100 To 3118) - Mitsubishi Electric MELSEC Q Series User Manual

3 SPECIFICATIONS

3.8.15 Tag event monitor status area 2 (Address: 3100 to 3118)

Address:
Address:
3 - 54
(c) The following is observed when a tag event monitor error occurs.
(Example) When an error occurs in tag event monitor of the tag event
setting No. 16
 Tag event monitor error (X14) turns on
 Tag event monitor error data area (address: 10128 (bit 15)) of
 The error code is stored into the tag event monitor 16 error
(4) Tag event monitor 1 to 256 error code (Address: 10192 to 10447)
The error code that indicates the error status is stored into the corresponding tag
event setting No. area.
Refer to Section 9.3 for the error code.
The status related to the tag event monitor function can be confirmed.
Refer to Section 6.5 for the tag event monitor function.
POINT
When using the product whose first 5 digits of serial No. are 05112 or later, use the
tag event monitor status area 1 (address: 10000 to 10447). (Refer to Section
3.8.14)
When this area has been used previously, it can be used as-is.
(1) Tag event setting data (Address: 3100)
(a) This area stores information on whether "Tag event setting" in the event
setting has been made or not.
(b) The bit corresponding to the preset tag event setting No. turns on.
0: Not set
1: Set
b15 b14 b13 b12
3100 16 15 14 13
(2) Tag event occurrence data (Address: 3101)
(a) This area stores the tag event occurrence results.
(b) The bit corresponding to the tag event setting No. of a tag event turns on.
0: Event not occurred
1: Event occurred
b15 b14 b13 b12
3101 16 15 14 13
(c) A tag event occurs when the monitoring condition set in "Tag event setting"
of the event setting is satisfied.
the buffer memory turns on.
code area (address: 10207) of the buffer memory.
b11 b10 b9 b8 b7 b6
12 11 10 9 8 7
b11 b10 b9 b8 b7 b6
12 11 10 9 8 7
b5 b4 b3 b2 b1 b0
6 5 4 3 2 1
b5 b4 b3 b2 b1 b0
6 5 4 3 2 1
MELSEC-Q
3 - 54