Mitsubishi Electric MELSEC Q Series User Manual page 179

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 55
(e) Network communication route, Different network communication route
Set the network type, network No., start I/O address and station No. to be
accessed.
The setting items change depending on the set network.
POINT
(1) For access to the other station CPU, the routing parameters must also be set in
addition to this setting.
For the routing parameters, refer to the manual of the network module.
(2) After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update
screen is clicked, the programmable controller is powered off and then on, or
the CPU module is reset.
MELSEC-Q
4 - 55