Mitsubishi Electric MELSEC Q Series User Manual page 566

APPENDICES
Item
4 INTERVAL
5
EMAIL
6
DISCONNECT
7
BODY
8
APPEND
9
APPTAG
10 APPLOGGING
11
to EMAIL1 to EMAIL16
26
App - 62
Description
When "INTERVAL" is selected at
MODE
Interval
When "TIME" is selected at
MODE
Send an e-mail
Mark
when an event
Do not mark
occurs.
Disconnect from When "YES" is
the network selected at
after sending EMAIL
mail
When "NO" is selected at EMAIL
When "YES" is selected at EMAIL 0 to 256 characters
E-mail main text
1
When "NO" is selected at EMAIL
When "YES" is
selected at
Attached file
EMAIL
When "NO" is selected at EMAIL
When "TAG" is selected at
APPEND
Tag setting No.
When other than the above is
selected at APPEND
When "LOGGING" is selected at
Logging setting APPEND
No.
When other than the above is
selected at APPEND
When "YES" is
selected at
Destination 1 to
EMAIL
16 2
When "NO" is selected at EMAIL
1 Refer to Appendix 6.2 (2) for the precautions for editing the e-mail main text.
2 Specify the e-mail address (To:) setting No. set to the label of EMAIL.CSV.
An error will occur if the specified e-mail address (To:) setting No. does not exist in
EMAIL.CSV.
1 to 86400 (unit: seconds)
(Blank)
Mark
Do not mark
(Blank)
(Blank)
None
Tag data
Logging Data
(Blank)
1 to 64
(Blank)
1 to 64
(Blank)
Mark
Do not mark
(Blank)
: Must be set
MELSEC-Q
Setting
Set value
requirement
YES
NO
YES
NO
NONE
TAG
LOGGING
YES
NO
: Need not be set (Invalid)
App - 62