Service Procedure Icons - Toro 1P65F-2 Service Manual

Service Procedure Icons

Preface
The following icons appear throughout this Service Manual to bring attention to
specific important details of a service procedure.
Critical Process
This icon is used to highlight:
•
Installing safety equipment (shields, guards, seat belts, brakes, and R.O.P.S.
components) that may have been removed
•
Dimensions or settings that must be maintained for proper machine operation
•
A specific fastener tightening sequence
•
Component orientation that may not be obvious
Critical Torque
This icon is used to highlight an assembly torque requirement that is different
than what is recommended in the Standard Torque Tables.
Fluid Specifications
This icon is used to highlight fluid specifications and capacities that are less
common, and may not appear on the machine service decal or in the machine
Operator's Manual.
Note: Refer to the service decal on the machine and the machine Operator's
Manual for commonly used fluid specifications and capacities.
Page 4 1P65F-2 Service Manual
3429-270 Rev A