Crankcase Breather System Removal (continued)
Engine Top End: Service and Repairs
3. Remove the shroud by lifting away from the engine.
4. Loosen the nut securing the crankshaft to the engine.
5. Unhook the spring from the brake mechanism.
6. Place a pry bar under the flywheel, pry the flywheel upwards. Using a soft
based hammer, loosen the flywheel assembly from crankshaft, only striking
the top of the nut to prevent crankshaft damage.
Figure 22
Figure 23
Page 4–14
1P65F-2 Service Manual
3429-270 Rev A