Pop Off Test - Toro 1P65F-2 Service Manual

Carburetor Assembly (continued)

Pop Off Test

1P65F-2 Service Manual
3429-270 Rev A
5. Install the 10 mm bolt securing the float bowl to carburetor body. Torque bolt
to 52–79 in-lbs. (6–9 Nm).
1. Install the needle into the float and onto the carburetor body.
2. Position the carburetor with the float up.
3. Install the pressure tester onto the inlet fitting on the carburetor.
Figure 87
Figure 88
Page 6–21 Fuel System: Service and Repairs