Connecting Rod Installation (continued)
Piston and Rings Assembly Replacement
Piston and Rings Assembly Removal
Compression System: Service and Repairs
14. Install the recoil assembly onto the engine. Secure with 3 (10 mm) acorn
nuts. Torque acorn nuts to 52–87 in-lbs. (6–10 Nm).
15. Add oil to the engine.
1. Drain the oil.
2. Remove the 3 (10 mm) acorn nuts securing the recoil assembly to the top of
the engine. Remove the recoil assembly.
Figure 187
Figure 188
Page 7–42
1P65F-2 Service Manual
3429-270 Rev A