Toro 1P65F-2 Service Manual page 139

Connecting Rod Installation (continued)
1P65F-2 Service Manual
3429-270 Rev A
10. Install the nut holding the flywheel to the crankshaft. Torque nut to 59–66
ft-lbs. (80–90 Nm).
11. Hook the spring to the brake mechanism.
12. Install the shroud onto the engine.
13. Place the carbon canister into position on the engine. Install the fuel tank
vent hose to the hose retainer on the engine shroud.
Figure 185
Figure 186
Page 7–41 Compression System: Service and Repairs