Recoil Inspection (continued)
Recoil Installation
1P65F-2 Service Manual
3429-270 Rev A
2. Verify the recoil dogs fully engage and disengage (fully seated) with the
recoil hub.
1. Install the shroud onto the engine.
2. Place the carbon canister into position on the engine. Install the fuel tank
vent hose to the hose retainer on the engine shroud.
3. Install the recoil assembly onto the engine. Secure with 3 (10 mm) acorn
nuts. Torque acorn nuts to 52—87 in-lbs. (6–10 Nm).
Figure 8
Figure 9
Page 4–7
Engine Top End: Service and Repairs