Sump Cover Installation; Governor Assembly Removal - Toro 1P65F-2 Service Manual

Sump Cover Removal (continued)

Sump Cover Installation

Governor Assembly Replacement

Governor Assembly Removal

1P65F-2 Service Manual
3429-270 Rev A
1. Install the sump cover to the crankcase. Secure the crankcase with 7 (10
mm) bolts. Torque the bolts to 70–105 in-lbs. (8–12 Nm).
2. Turn the motor over.
3. Add oil to the engine.
1. Drain the oil.
Figure 296
Figure 297
Page 9–5 Engine Lower End: Service and Repairs