Valve Adjustment Removal - Toro 1P65F-2 Service Manual

Piston and Rings Assembly Installation (continued)
Valve Adjustment

Valve Adjustment Removal

1P65F-2 Service Manual
3429-270 Rev A
35. Install the recoil assembly onto the engine. Secure with 3 (10 mm) acorn
nuts. Torque acorn nuts to 52–87 in-lbs. (6–10 Nm).
36. Turn the motor over.
37. Add oil to the engine.
1. Remove the 3 (10 mm) acorn nuts securing the recoil assembly to the top of
the engine. Remove the recoil assembly.
Figure 241
Figure 242
Page 7–69 Compression System: Service and Repairs