Toro 1P65F-2 Service Manual page 186

Ignition Coil Installation (continued)
Electrical System: Service and Repairs
4. Install the shroud onto the engine.
5. Place the carbon canister into position on the engine. Install the fuel tank
vent hose to the hose retainer on the engine shroud.
6. Install the recoil assembly onto the engine. Secure with 3 (10 mm) acorn
nuts. Torque acorn nuts to 52–87 ft-lbs. (6–10 Nm).
Figure 274
Figure 275
Page 8–12 1P65F-2 Service Manual
3429-270 Rev A