Toro 1P65F-2 Service Manual page 185

Ignition Coil Installation (continued)
1P65F-2 Service Manual
3429-270 Rev A
2. Install the coil mounting bolt and shroud mounting stud onto the coil. Torque
the bolt and stud to 90 in-lbs. (10 Nm).
Set air gap: 0.0157-0.007 in (0.4-0.2 mm)
3. Install the spark plug wire to the spark plug.
Figure 272
Figure 273
Page 8–11 Electrical System: Service and Repairs