Program example 1
The following figure shows a program example to start D/A conversion by setting the digital values for D/A conversion for CH1
to CH4 and enabling analog output.
(32) Sets Digital value between CH1 and CH4.
(108) Enables output for CH1 to CH4.
(164) Disables output for CH1 to CH4 if any of the following signals is off.
• 'DA output enable command signal' (X21)
• 'Module READY' (X1000)
• 'External power supply READY flag' (X1007)
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
197